What is the difference between nitrile coated and latex coated work gloves?

Nitrile coating resists oil, fuel and solvents and keeps its grip on greasy metal, which is why it suits mechanical and site work. Latex coating grips better on wet and damp surfaces such as rained-on timber or a hose reel, but it degrades faster around oil. If you handle both, keep a pair of each rather than compromising on one.

Are the black nitrile diamond grip gloves reusable?

No, those are disposable. The box of 50 is an 8 mil diamond grip glove intended for single sessions on dirty work such as oil changes, resin and decorating. The 8 mil thickness is heavier than a standard examination glove, so it survives a full job rather than tearing halfway, but it is not built to be washed and worn again.

Which gloves are best for winter gardening?

The latex coated thermal pair. The brushed lining holds warmth while the latex palm keeps grip on wet handles and cold steel, which is the exact combination that fails when you use a plain knitted glove in December. For rough hedge and fence work in the same weather, step up to the heavy duty rigger gloves instead.

Do rigger gloves come in different sizes?

Rolson rigger gloves are supplied in a one size fits most cut, sized generously so they pull off quickly if something snags. That deliberate looseness is a safety feature on handling work, but it makes them a poor choice for anything needing dexterity. Use the coated knitted pairs where you need to feel a fixing.

How often should work gloves be replaced?

Replace a coated glove as soon as the coating splits at the fingertip or the knit shows through the palm, because grip drops sharply once the surface breaks. On daily site use that is usually four to eight weeks. The four pair value pack exists for exactly this reason, since buying singly tends to mean working on a worn-out pair for longer than you should.

What is the difference between nitrile coated and latex coated work gloves?

Nitrile coating resists oil, fuel and solvents and keeps its grip on greasy metal, which is why it suits mechanical and site work. Latex coating grips better on wet and damp surfaces such as rained-on timber or a hose reel, but it degrades faster around oil. If you handle both, keep a pair of each rather than compromising on one.

Are the black nitrile diamond grip gloves reusable?

No, those are disposable. The box of 50 is an 8 mil diamond grip glove intended for single sessions on dirty work such as oil changes, resin and decorating. The 8 mil thickness is heavier than a standard examination glove, so it survives a full job rather than tearing halfway, but it is not built to be washed and worn again.

Which gloves are best for winter gardening?

The latex coated thermal pair. The brushed lining holds warmth while the latex palm keeps grip on wet handles and cold steel, which is the exact combination that fails when you use a plain knitted glove in December. For rough hedge and fence work in the same weather, step up to the heavy duty rigger gloves instead.

Do rigger gloves come in different sizes?

Rolson rigger gloves are supplied in a one size fits most cut, sized generously so they pull off quickly if something snags. That deliberate looseness is a safety feature on handling work, but it makes them a poor choice for anything needing dexterity. Use the coated knitted pairs where you need to feel a fixing.

How often should work gloves be replaced?

Replace a coated glove as soon as the coating splits at the fingertip or the knit shows through the palm, because grip drops sharply once the surface breaks. On daily site use that is usually four to eight weeks. The four pair value pack exists for exactly this reason, since buying singly tends to mean working on a worn-out pair for longer than you should.

Black Nitrile Gloves & Work Gloves

11 products

…more >>

Rolson Nitrile Coated Work Gloves

Rolson nitrile coated work gloves are the everyday pair for anyone handling metal, timber, brick or greasy components. The nitrile palm coating grips where a bare knitted glove slips, and it shrugs off oil in a way that latex does not. Klevaro stocks the red and black and the white and grey codes, plus a four pair value pack, all genuine Rolson Tools lines held in the UK.

Latex Coated and Thermal Pairs for Cold, Wet Work

Where nitrile wins on oil, latex coating wins on wet grip. The latex coated work gloves and the foam latex version give better hold on damp timber and wet handles, and the latex coated thermal pair adds a brushed lining for winter work outdoors. These are the pairs to reach for on garden tool jobs in October through March, when the problem is cold fingers rather than sharp swarf.

Heavy Duty Rigger Gloves and Disposable Boxes

Heavy duty rigger gloves sit at the top of the range, with a reinforced leather palm and a stiff cuff for handling scaffold, slabs, fencing and pallets. One version ships bundled with a pair of secateurs. At the opposite end, the black nitrile 8 mil diamond grip box of 50 covers dirty short jobs where you want to strip the glove off and bin it, which is the sensible choice for oil changes, resin work and decorating. See the decorating range for the rollers and scrapers those disposables usually accompany.

Choosing the Right Pair

Match the coating to the hazard rather than the price. Nitrile coated work gloves for oil, metal and general site handling. Latex coated for wet grip. Thermal latex for winter. Rigger for anything with a rough edge or a splinter. Disposable nitrile for tasks that ruin a reusable pair in an hour. Most trades end up keeping two of the four on the van at once. Pair them with the Rolson trade tool range or the workshop lighting and bench gear for a complete kit.

Sizing, Fit and Common Mistakes

The most common mistake is buying a glove that is too big because it feels easier to pull on. A loose coated glove rotates on the hand under load, and the moment the palm coating is no longer sitting on your palm you have lost the grip you paid for. A correctly sized coated glove should feel snug across the knuckles with no slack at the fingertips. The second mistake is using a disposable nitrile glove for a job that needs a coated one. An 8 mil disposable resists chemicals well but offers almost no abrasion resistance, so it shreds within minutes on brick, timber or rough metal. The third is keeping a worn pair in service because the replacement is still in the box. Coated gloves fail gradually rather than suddenly, so the grip is already poor well before the glove looks finished. Check the palm every few weeks and swap it out as soon as the knit shows through. For the wider protective and site range see general tools.